Environmental Impact Assessment studies are increasingly undertaken before a project is cleared by the Government. Discuss the environmental impacts of coal-fired thermal plants located at coal pitheads.
Set the EIA context briefly, then discuss the air, water, land, forest, health and social impacts of pithead coal plants, including their cumulative effect in coalfield clusters, and suggest how EIA should address them.
Common trap: Weak answers list generic pollution. A top answer explains why pithead location concentrates impacts (mines plus several plants in one area), names clusters like Singrauli, Korba, Talcher-Angul and Chandrapur, links them to CPCB's Comprehensive Environmental Pollution Index, and points to the weakness of project-by-project EIA versus cumulative assessment.
SyllabusConservation, environmental pollution and degradation, environmental impact assessment.
Model answer
12.5 marks · 200-word limitUnder the EIA Notification, 2006, large thermal power plants are Category A projects needing central clearance after baseline study, public hearing and appraisal. Plants are often sited at coal pitheads to avoid hauling high-ash Indian coal by rail; this saves transport costs but piles mining and combustion impacts onto the same forested, often tribal, landscape.
- Fly ash and ash ponds
- SO2, NOx and particulate matter
- Mercury and heavy metals
- Heavy water drawal, hot effluent
- Forest loss and land degradation
- Displacement of tribal communities
- Cumulative cluster pollution
Air and climate impacts
- Particulates: Indian coal's high ash content produces large volumes of fly ash; poorly run electrostatic precipitators and open mine dust raise PM levels around the cluster.
- Gases: Sulphur dioxide, nitrogen oxides and mercury cause respiratory disease and acid deposition; until 2015 Indian plants had no SO2 or NOx emission limits (only stack-height rules) and almost none had flue-gas desulphurisation.
- Carbon: Subcritical, low-efficiency units emit more carbon dioxide per unit of power, worsening India's emission intensity.
Water and land impacts
- Water: Plants draw huge volumes for cooling, competing with farms and towns; ash-pond leaks and hot water discharge damage rivers and reservoirs such as the Rihand reservoir in Singrauli.
- Ash ponds: Ash ponds occupy large areas, leach heavy metals into groundwater and can breach, despite the Fly Ash Notification's goal of full ash utilisation in bricks and cement.
- Forests: Pitheads lie in coal belts of central and eastern India, so mines, plants, roads and transmission lines fragment forests and elephant corridors.
Social and cumulative impacts
- Displacement: Tribal and forest-dependent people are displaced, sometimes more than once, losing rights under the Forest Rights Act, 2006.
- Critically polluted: CPCB's CEPI study of 2009 found coalfield clusters such as Singrauli, Korba, Angul-Talcher and Chandrapur critically polluted, leading to a temporary moratorium on new projects in 2010.
- Weak EIA: Project-wise EIAs ignore the combined effect of many plants and mines; public hearings are often rushed and compliance monitoring is weak.
Pithead plants make economic sense, but the EIA process must move to cumulative and carrying-capacity studies, strict emission and water norms, supercritical technology, full ash use and fair rehabilitation. (Later, in December 2015, MoEFCC notified SO2, NOx and mercury limits for thermal plants.)
Read more — sources
- OfficialMoEF, Environmental Impact Assessment Notification, 2006
- OfficialCentral Pollution Control Board, Comprehensive Environmental Pollution Index (CEPI) assessment of industrial clusters (2009)
- OfficialMoEF, Fly Ash Notification, 1999 (as amended in 2009)
- ReportCentre for Science and Environment, Heat on Power: Green Rating of Coal-based Thermal Power Plants (2015)
More from GS Paper 3 2014
Model answer by the EdiShorts editorial team. It is one well-argued treatment of the question, written to the official word limit — not an official UPSC answer key.