EdiShorts

UPSC Prelims 2024 CSAT Q5 · Numeracy

Year2024
PaperCSAT
QuestionQ5
SubjectNumeracy

What is the least possible number of cuts required to cut a cube into 64 identical pieces?

  1. a8
  2. b9
  3. c12
  4. d16
Show answer & explanationHide answer
Correct answer(b) 9

To get 64 identical pieces with the minimum cuts, we distribute the cuts equally along the 3 axes as 3 cuts each, giving 3 + 3 + 3 = 9 cuts.

Statement-by-statement analysis

✗ Option (a)
  • With 8 cuts, the most balanced distribution along 3 perpendicular directions is 3, 3, and 2 cuts.
  • This yields (3 + 1) × (3 + 1) × (2 + 1) = 4 × 4 × 3 = 48 pieces, which is less than 64.
✓ Option (b)
  • To minimize total cuts x + y + z for a product of (x + 1)(y + 1)(z + 1) = 64, the values of x, y, and z must be as close as possible.
  • Factoring 64 into 3 closest factors gives 4 × 4 × 4, so (x + 1) = 4, (y + 1) = 4, and (z + 1) = 4.
  • This gives x = 3, y = 3, and z = 3, making the minimum total cuts equal to 3 + 3 + 3 = 9 cuts.
✗ Option (c)
  • 12 cuts distributed equally as 4 cuts per axis gives (4 + 1) × (4 + 1) × (4 + 1) = 125 pieces.
  • While 64 pieces can be obtained with 12 cuts using unbalanced cuts, 12 is not the minimum number of cuts required.
✗ Option (d)
  • 16 cuts can also yield 64 or more pieces depending on distribution.
  • However, 16 is much greater than the minimal requirement of 9 cuts.

Concept to know

  • A cube can be cut along three mutually perpendicular axes X, Y, and Z.
  • Making x cuts along the X-axis, y cuts along the Y-axis, and z cuts along the Z-axis results in N = (x + 1)(y + 1)(z + 1) identical pieces.
  • The total number of cuts required is C = x + y + z.
  • To minimize the cuts C for a fixed number of pieces N, the values of (x + 1), (y + 1), and (z + 1) should be as equal as possible based on the AM-GM inequality principle.
  • For N = 64, the factors closest to each other are 4 × 4 × 4, which means x = 3, y = 3, z = 3.

Related facts for revision

  • Maximizing pieces for given cuts: Divide total cuts n into three parts as equal as possible x + y + z = n, then max pieces = (x + 1)(y + 1)(z + 1).
  • Single axis cutting: Making cuts along only one direction requires N - 1 cuts to get N pieces.
  • Painted cube problems: Understanding cut distribution helps count cubes with 3, 2, 1, or 0 faces painted.
How UPSC tests this

Optimization logic for three-dimensional geometry and product factorization.

Trap: Candidates often incorrectly guess 8 thinking 8 × 8 = 64, forgetting that cuts along three dimensions multiply as (x+1)(y+1)(z+1).

More Numeracy PYQs

All Numeracy questions →

Answer from the official UPSC answer key. Explanation by the EdiShorts editorial team.