UPSC Prelims 2026 CSAT Q15 · Spatial Reasoning
The top of a table is rectangular and its dimensions are 6' × 10'. Two rectangular portions of the table top are painted in blue colour; both these portions have dimensions 2.5' × 8' and each of them has exactly two sides common with two edges of the table top. If the table is fixed to the ground and the remaining portion of the table top is painted in white, how many different patterns are possible when observed from above?
- a2
- b4
- c6
- d8
Show answer & explanationHide answer
Each blue strip must occupy a corner with its 8' side along a 10' edge. Of the 6 possible corner pairs, the 2 pairs on the same long edge overlap (8 + 8 = 16 > 10), which leaves 6 − 2 = 4 patterns.
Statement-by-statement analysis
- You get 2 if you count only the diagonal pairs, or only the short-edge pairs.
- You also get 2 if you treat mirror-image or rotated layouts as the same pattern.
- The table is fixed to the ground, so the left-pair and right-pair layouts look different from above, and the two diagonal layouts also look different. All 4 must be counted.
- Orientation is forced. The 8' side cannot fit along the 6' edge (8 > 6), so it lies along a 10' edge and the 2.5' side lies along a 6' edge.
- Placement is forced. 'Exactly two sides common' with no side equal to 6 or 10 means each piece sits in a corner. With 4 corners, the number of pairs is C(4,2) = 6.
- Same long edge: 8 + 8 = 16 > 10, so the pieces overlap and 2 pairs are invalid. Same short edge: 2.5 + 2.5 = 5 < 6, so 2 pairs are valid. Diagonal: the strips sit on opposite long edges with combined width 5 < 6, so 2 pairs are valid. Total = 2 + 2 = 4.
- 6 = C(4,2) is simply the number of ways to choose 2 corners out of 4.
- It ignores the overlap check. Two strips in the corners of the same 10' edge would need 8 + 8 = 16' of length, which is more than the 10' available.
- Removing these 2 impossible pairs gives 6 − 2 = 4, not 6.
- You get 8 by counting ordered pairs (4 valid × 2). The blue pieces are identical, so order does not matter.
- You can also reach 8 by allowing each strip two orientations in a corner. The 8' side cannot lie along the 6' edge, so this is impossible.
- Both errors inflate the count. The correct number is 4.
Concept to know
- Step 1: fix the orientation. Compare each side of the piece with each side of the board. Any side longer than a board edge (here 8 > 6) cannot lie along that edge, so orientation is often forced.
- Step 2: decode the edge condition. 'Exactly two sides common with edges' means either a corner (two adjacent edges) or a full span between two opposite edges. A span is possible only if one side of the piece equals a board dimension, and here neither does, so only corners are possible.
- Step 3: list all candidate placements. Choose positions for identical pieces using combinations: C(4,2) = 6 corner pairs.
- Step 4: run the overlap or fit test for each pair. Pieces sharing an edge need the sum of their lengths along that edge to be no more than the edge length (16 > 10 fails; 5 < 6 passes). Pieces at opposite corners need their combined widths across the board to fit (5 < 6 passes).
- Step 5: apply the symmetry rule from the question. A fixed table, viewed from above, means rotations and reflections count as different patterns. If the table could be turned or flipped, equivalent layouts would be merged.
Related facts for revision
- Tiling or placement counting: rectangles placed on a board or floor. Always check 'can it fit in this orientation' before counting.
- Movable versus fixed object: if the question says the object can be rotated, divide the layouts into symmetry classes. With rotation only this question would give 3; with rotation and flipping it would give 2.
- Identical versus distinct pieces: identical pieces use combinations, while different-coloured pieces use permutations and double the count of unordered pairs.
- Variants that say 'at least one side common' or 'touches only one edge' change the placement set completely. Underline the exact edge condition.
- Quick sketch method: draw a 10 by 6 rectangle, mark the four corners, and strike out pairs on the same long edge. This takes about 30 seconds.
Spatial visualisation combined with systematic counting under constraints: forced orientation, the corner condition, an overlap check, and correct treatment of a fixed object.
Trap: Option (c) 6 is tempting because C(4,2) = 6 comes to mind immediately and candidates skip the overlap check (8 + 8 = 16 > 10). Option (a) 2 traps those who merge mirror images even though the table is fixed. Time-saver: once you see that the long-edge pairs fail, the answer is 6 − 2 = 4.
More Spatial Reasoning PYQs
All Spatial Reasoning questions →
Answer from the official UPSC answer key. Explanation by the EdiShorts editorial team.