UPSC Prelims 2026 CSAT Q65 · Numeracy
Year2026
PaperCSAT
QuestionQ65
SubjectNumeracy
An alloy P contains 20% copper and 80% zinc by weight. Another alloy Q contains 60% copper and 40% zinc by weight. A third alloy R is to be prepared from P and Q so that it contains equal amount of copper and zinc. In what ratio, amounts of P and Q be mixed in order to get R?
- a1 : 3
- b3 : 1
- c2 : 3
- d3 : 2
Show answer & explanationHide answer
Correct answer(a) 1 : 3
Applying the rule of alligation on copper concentration yields a ratio of (60 - 50) : (50 - 20) = 10 : 30 = 1 : 3.
Statement-by-statement analysis
✓ Option (a)
- Using copper percentages, the required ratio of alloy P to alloy Q is (60 - 50) : (50 - 20) = 10 : 30.
- Simplifying 10 : 30 gives 1 : 3.
- Verification: 1 unit of P (0.2 Cu) plus 3 units of Q (1.8 Cu) gives 2.0 units of Cu in 4.0 total units, which equals 50% copper.
✗ Option (b)
- This option represents the ratio of Q to P (30 : 10 = 3 : 1) rather than P to Q.
- Mixing 3 units of P and 1 unit of Q gives (3 x 20 + 1 x 60) / 4 = 30% copper, which does not satisfy the requirement.
✗ Option (c)
- Mixing P and Q in the ratio 2 : 3 yields a copper percentage of (2 x 20 + 3 x 60) / 5 = 220 / 5 = 44%.
- This is less than the required 50% copper concentration.
✗ Option (d)
- Mixing P and Q in the ratio 3 : 2 yields a copper percentage of (3 x 20 + 2 x 60) / 5 = 180 / 5 = 36%.
- This is far below the required 50% copper concentration.
Concept to know
- The Rule of Alligation is a shortcut derived from the weighted average formula to quickly find the ratio of two ingredients mixed to obtain a desired average concentration.
- Equal amounts of copper and zinc in final alloy R means the target concentration of copper is 50% and zinc is 50%.
- Alligation formula: Quantity of Cheaper / Quantity of Dearer = (Dearer Concentration - Mean Concentration) / (Mean Concentration - Cheaper Concentration).
- Calculations can be done using either component (copper or zinc), but consistency in using the same component throughout is essential.
- The weighted average formula alternative is: Target Concentration = (P x Concentration_P + Q x Concentration_Q) / (P + Q).
Related facts for revision
- Solving using Zinc percentages: Ratio of P to Q = |40 - 50| : |50 - 80| = 10 : 30 = 1 : 3, confirming the result.
- Replacement problems: Finding concentration when a fixed volume of mixture is repeatedly removed and replaced with pure solute.
- Multi-component mixtures: Solving three-variable alloy problems by grouping components into pairs relative to the mean target value.
- Profit and Loss Alligation: Using alligation to find the mixing ratio of items with different profit or loss percentages.
How UPSC tests this
Ability to apply mixture rules and alligation techniques quickly to quantitative reasoning problems.
Trap: Carelessly reversing the order of terms to select 3 : 1 instead of 1 : 3. Always align the difference across the cross-multiplication diagonal correctly.
← Previous · Q64Which of the following statements is/are correct? I. The convergence model…Next · Q66 →A is a 2-digit number with different digits. B is also a 2-digit number and is…
More Numeracy PYQs
A natural number N is such that it can be expressed as N = p + q + r, where p, q and r are distinct factors of N. How many numbers below 50 have this property ?
See the answer & explanation →
Three prime numbers p, q and r, each less than 20, are such that p - q = q - r. How many distinct possible values can we get for (p + q + r) ?
See the answer & explanation →
How many possible values of (p + q + r) are there satisfying 1/p + 1/q + 1/r = 1, where p, q and r are natural numbers (not necessarily distinct) ?
See the answer & explanation →
Team X scored a total of N runs in 20 overs. Team Y tied the score in 10% less overs. Had team Y's average run rate (runs per over) been 50% higher, the scores would have been tied in 12 overs. How many runs were scored by team…
See the answer & explanation →Answer from the official UPSC answer key. Explanation by the EdiShorts editorial team.