EdiShorts

UPSC Prelims 2026 CSAT Q79 · Numeracy

Year2026
PaperCSAT
QuestionQ79
SubjectNumeracy

There are two chemicals which do not react with each other. A container contains 10 litres of the chemical A. One litre of this chemical is removed from it and one litre of the chemical B is poured. Then one litre of the mixture is removed from the container and one litre of B is poured. If this process of replacing one litre of the mixture by one litre of B is performed once more, then what is the volume of B that is present in the container approximately (in percentage)?

  1. a25
  2. b27
  3. c29
  4. d31
Show answer & explanationHide answer
Correct answer(b) 27

After three successive replacements, Chemical A constitutes 72.9 percent of the 10-litre mixture, leaving Chemical B at 27.1 percent, which rounds to approximately 27 percent.

Statement-by-statement analysis

✗ Option (a)
  • Calculates B as 25 percent, which assumes a linear removal of 1 litre of A in each step without considering dilution.
  • Simple subtraction gives 10 minus 3 equals 7 litres of A (30 percent B), but even under incorrect simple removal assumptions, 25 percent does not match.
  • Working: 100 percent minus 72.9 percent equals 27.1 percent, not 25 percent.
✓ Option (b)
  • Initial volume of Chemical A is 10 litres and total volume remains 10 litres after every step.
  • Fraction of Chemical A remaining after each step is (10 - 1) / 10 = 9 / 10.
  • After 3 steps, volume of Chemical A = 10 * (9/10)^3 = 10 * 0.729 = 7.29 litres.
  • Volume of Chemical B = 10 - 7.29 = 2.71 litres, which is 27.1 percent of the total volume, approximately 27 percent.
✗ Option (c)
  • Calculates B as 29 percent, which occurs if one mistakenly counts only two replacement cycles instead of three.
  • With 2 replacements, remaining A would be 10 * (0.9)^2 = 8.1 litres, making B equal to 1.9 litres (19 percent), or miscalculating 1 - 0.729 as 0.29.
  • Working: 100 - 72.9 = 27.1 percent, which rounds down to 27 percent, not up to 29 percent.
✗ Option (d)
  • Calculates B as 31 percent, which overestimates the amount of B added.
  • This error happens if a candidate forgets that subsequent replacements remove a mixture containing both A and B, not pure A.
  • Working: Correct percentage of B is 27.1 percent, which is closest to option (b).

Concept to know

  • The standard formula for repeated dilution of liquid A replaced by liquid B is Final Quantity of A = Initial Quantity of A * (1 - x / V)^n, where V is total volume, x is replaced volume per step, and n is total steps.
  • Since the total container volume V remains constant at 10 litres, the percentage of liquid A remaining after n operations is given directly by (1 - x / V)^n * 100 percent.
  • The percentage of replacing liquid B present in the final mixture is always equal to 100 percent minus the percentage of liquid A remaining.
  • The first operation replaces pure chemical A, while subsequent operations replace a proportional mixture of A and B because the liquids do not react and form a uniform mixture.
  • Calculating powers like (0.9)^3 = 0.729 allows quick conversion of fractions to decimals without tedious intermediate calculations.

Related facts for revision

  • Varying replacement volume: If different volumes x1, x2, x3 are removed in successive steps, remaining quantity of A = Initial A * (1 - x1/V) * (1 - x2/V) * (1 - x3/V).
  • Milk and water replacement problems: The exact same dilution principle applies when milk is repeatedly drawn out and replaced with water.
  • Ratio after replacement: If the problem asks for the final ratio of A to B, it can be expressed directly as (Fraction of A left) : (1 - Fraction of A left), here 729 : 271.
  • Equal concentration problems: When two containers of different concentrations are mixed repeatedly, weighted averages or alligations can be combined with dilution formulas.
How UPSC tests this

Understanding of successive dilution processes, compound percentage reduction, and ratio-mixture formulas.

Trap: Misinterpreting the phrase performed once more to mean 2 total steps instead of 3, or assuming 1 litre of pure A is removed every time rather than 1 litre of the mixture.

More Numeracy PYQs

All Numeracy questions →

Answer from the official UPSC answer key. Explanation by the EdiShorts editorial team.