EdiShorts

UPSC Prelims 2026 CSAT Q24 · Reasoning

Year2026
PaperCSAT
QuestionQ24
SubjectReasoning

A cut on a solid object divides the object into two parts where the new surfaces thus produced are plane. On the other hand, one single cut can be used to cut more than one object at a time. In an experiment, the total number of pieces produced by applying n cuts is denoted by x_n. The experiment is performed on a solid cube where pieces remain unmoved after each cut. In this experiment, if after the third cut, the pieces are identical, then which of the following is not a possible value for x_4?

  1. a16
  2. b12
  3. c8
  4. d5
Show answer & explanationHide answer
Correct answer(a) 16

x3 can only be 4, 6 or 8, and one plane can cut at most 4, 6 or 7 of those pieces, so x4 is at most 8, 12 or 15 and can never be 16.

Statement-by-statement analysis

✓ Option (a)
  • 16 needs 8 pieces cut into 16. Only the 2×2×2 arrangement has 8 pieces, so the 4th plane would have to cut all 8 cubes.
  • A plane through the centre of a 2×2×2 block meets at most 6 of the 8 small cubes. A plane missing the centre meets at most 7, because the cube farthest on the other side is always missed. So the maximum is x4 = 8 + 7 = 15.
  • With 4 slabs the maximum is 4 + 4 = 8, and with 6 prisms it is 6 + 6 = 12. So 16 is not possible, and this is the answer.
✗ Option (b)
  • Two parallel cuts give 3 equal slabs, and one perpendicular cut through all of them gives 6 identical prisms (x3 = 6).
  • A 4th plane perpendicular to the length of all 6 prisms cuts every one of them, so x4 = 6 + 6 = 12.
  • Alternatively, with 8 cubes, a plane slicing one 2×2 layer gives 8 + 4 = 12. So 12 is possible.
✗ Option (c)
  • Three parallel equally spaced cuts give 4 identical slabs (x3 = 4).
  • A 4th cut perpendicular to the slabs cuts all 4 of them, so x4 = 4 + 4 = 8.
  • So 8 is possible.
✗ Option (d)
  • Start again with 4 identical slabs (x3 = 4).
  • Make the 4th cut parallel to the slabs, passing through only one slab, so only 1 piece is split.
  • Then x4 = 4 + 1 = 5, so 5 is possible. Many candidates wrongly assume x3 must be 8.

Concept to know

  • Each piece a plane passes through becomes two, so x(n+1) = x(n) + (number of pieces the new cut passes through).
  • Since pieces stay unmoved, one cut can split several pieces, but only those its flat plane actually meets.
  • First list every way the cube can be in identical pieces after 3 cuts: 3 parallel cuts give 4 slabs, a 2 + 1 arrangement gives 6 prisms, and 1 + 1 + 1 mutually perpendicular cuts give 8 cubes.
  • For each case, find the range of the 4th cut, from cutting 1 piece up to the maximum a plane can meet. That gives 4 slabs: 5 to 8, 6 prisms: 7 to 12, and 8 cubes: 9 to 15.
  • The union of these ranges is 5 to 15, so any option outside it, such as 16, is the impossible value.

Related facts for revision

  • Maximum pieces from n plane cuts of a cube with pieces unmoved (cake numbers) is (n³ + 5n + 6)/6, which gives 2, 4, 8, 15, 26. So 4 cuts can never give more than 15 pieces, and 16 is out immediately.
  • If pieces may be rearranged between cuts, pieces can double every time and reach 2ⁿ. Always read whether pieces are moved or unmoved.
  • The 2D analogue is the lazy caterer sequence: n straight cuts give at most (n² + n + 2)/2 pieces of a pancake.
  • Cube painting and cutting questions use the same grid idea: an a×b×c arrangement of identical pieces needs (a−1) + (b−1) + (c−1) cuts.
  • In 'which is not possible' questions, find the minimum and maximum bounds first. An option beyond the absolute maximum is usually the answer.
How UPSC tests this

Spatial visualisation and case analysis: listing all valid configurations rather than only the obvious one, and bounding the outcome.

Trap: Candidates assume identical pieces must mean 8 small cubes, then mark 5 as impossible, or think a 4th cut can halve all 8 cubes to give 16. Time-saver: 4 unmoved plane cuts can give at most 15 pieces (cake number), so 16 is impossible without checking the other options.

More Reasoning PYQs

All Reasoning questions →

Answer from the official UPSC answer key. Explanation by the EdiShorts editorial team.